As hobbies go, 3D printing is one of my favorites. With a small (ish) investment into the hardware, you can create just about any object imaginable: A key fob for your Apple Tag (in your face, $35 AirTag Loop!), a full-color Wall-E model (with moving arms and head!), an adjustable phone stand (so you can watch how-to videos hands-free), a working ukulele (BYO strings) or even a complete Iron Man suit (one piece at a time, of course). If you're a total novice at this, I recommend starting with the Creality Sermoon V1, a great deal at $369 and one of the easiest 3D printers I've ever used.

However, it has a pretty small print bed, one that's easy to outgrow. That's why I'm now focusing my attention on a pair of new larger models: the AnyCubic Kobra Plus ($448, from $560) and Creality CR-10 Smart Pro ($699). Both are extremely capable — and extremely large. Make sure you check the measurements before buying and have a dedicated space with enough room.

There are a lot of similarities between these two: 4.3-inch touchscreen control panels, all-metal extruders, dual-threaded Z-axis designs, filament run-out detection, even built-in tool drawers.

But is there a clear winner here? Read on to find out.

An unusually good 3D printer for the price, the Kobra Plus offers a huge print bed and a refreshingly simple touchscreen interface.

If I were to judge the Kobra Plus on setup alone, I might advise you to steer clear. AnyCubic provides very basic documentation, not all of which is accurate. For example, it mentions retrieving various tools from a drawer in the front of the printer's base, but that drawer arrived empty; all the tools were in a separate bag. The glass print bed was repeatedly referred to as the "grass plate." And the included starter filament isn't even a mini-spool's worth; it's barely enough for a test print.

Novices may also be chagrined to discover that while AnyCubic has YouTube videos for specific tasks (like bed leveling and print-head replacement), there's no actual unboxing and setup video. I was able to find a couple user-created videos; this one proved helpful.

In contrast to the questionable documentation (there's a better, more complete manual on the included microSD card, which also contains Cura slicing software), the Kobra's touchscreen user interface is one of the best I've tried. It's simple to learn and navigate, with large, clearly identified icons for various printer operations. I was also impressed by the printer's auto-leveling system, which proved vastly superior to Creality's. After running the procedure once (which weirdly requires touching a tool to the print head before starting), the bed was perfectly leveled; no manual adjustment needed. That's a big deal, as proper bed leveling is one of 3D printing's toughest obstacles.

However, more seasoned users should note that Z-offset adjustments are limited to 0.5-mm increments; most printers allow for 0.1 mm, which affords more precision. What's more, it seemed any Z-offset adjustments I made didn't carry over from one print to the next. Firmware updates could potentially resolve both these issues.

In testing, the Kobra Plus proved reasonably quiet and decidedly fast, and it produced high-quality prints. Ironically, it's so fast that you don't really get the opportunity to adjust the Z-offset until the print is well under way. Fortunately, thanks to auto-leveling, you shouldn't really need to. (That said, all printers require a bit of fine-tuning, as this one is no different.)

AnyCubic supplies a glass bed, which is certainly better than a standard metal one but not as good as the flexible magnetic plate included with the CR-10 Smart Pro. While glass does allow for better overall adhesion (another common printing obstacle), it can make print removal more difficult. And when the time comes that you need to remove AnyCubic's bed for cleaning, it's a hassle to remove and then replace the six metal clips holding it in place.

Mostly these are nitpicks; the Kobra Plus is a very good 3D printer, one of the better big models I've tested and a bargain if you're able to snag it for below $500. It's harder to set up than the Creality model and doesn't have nearly as deep a user-support bench, but it's actually easier to use thanks to the simple touchscreen UI and the auto-leveling feature. If you want big prints without a lot of hassle, this is definitely worth considering.

Creality's pricey CR-10 Smart Pro is a solid large-format 3D printer, but it's "auto-leveling" feature is a bit misleading. If you decide to buy one, wait for a sale.

You're probably wondering if the CR-10 Smart Pro could possibly be worth over $200 more than the Kobra Plus, especially given their size similarities. The answer is a qualified "maybe." This is arguably the best large-bed 3D printer Creality has made to date, but it still suffers from a few annoying quirks — and that price is hard to swallow.

The Smart Pro is able to handle prints up to 400mm tall, slightly higher than the Kobra (which tops out at 350mm). That could prove important for things like Mandalorian helmets, or anything else you're hoping to print in a single piece.

There's also an LED light strip that nicely illuminates the print bed, an HD camera you can use to remotely monitor print progress, onboard for Wi-Fi for wireless printing and monitoring via Creality's app and a removable spring-steel magnetic print bed. All these features are nice to have, but hardly essential.

The Smart Pro went together very quickly, with only the transom and a few cables needing to be installed. Because the filament feeds from a top-mounted spindle, the CR-10 has a slightly smaller footprint than the Kobra Plus, which feeds from the side. Even so, you'll need a large space to accommodate it.

It's worth noting that because Creality is arguably the best-known and most popular 3D printer maker, you'll find a large and active user community (on Facebook and elsewhere) and tons of tutorial videos on YouTube. Those are important resources, especially to beginners. When I was starting out with 3D printing, lots of Creality users came to my rescue with help and advice.

Unfortunately, I needed a bit of help here as well. Although Creality bills this as an "auto-leveling" printer, it's really not; leveling also requires manual adjustment of the four corners of the print bed, something I didn't realize until after my first prints failed. Thankfully, Creality proper has several useful setup videos, including one on leveling. It's a hassle, though, one that made me long for the simplicity of the Kobra Plus.

That said, the Smart Pro can handle a wider variety of materials, including carbon fiber and nylon, something to consider if you want to venture beyond the more traditional types of filament (namely PLA, ABS, PETG and TPU).

Because I've used various Creality models before, I wasn't surprised to discover that the CR-10 Smart Pro churned out near-perfect prints. The flexible bed made it a snap to remove those prints, though occasionally I did run into problems with adhesion. Creality's touchscreen UI is a little less intuitive than AnyCubic's, but still fairly easy to master.

Overall, I liked the CR-10 Smart Pro a lot. But I'm less enamored with the price, which seems steep for what you get.

If you want to print cosplay helmets and other large items, either of these printers will get the job done efficiently. That said, I have to give the nod to AnyCubic's Kobra Plus, which is not only more affordable, but also easier to use thanks to its well-implemented auto-leveling feature. It's quick and quiet, too, able to zip through print projects faster than many smaller models I've tried.

Whichever printer you choose, wait for a sale. At the time of this writing, both were discounted below their retail prices, and I've seen that happen repeatedly with various models from both companies.

Anna Kendrick says being stuck in an elevator at the Toronto International Film Festival was “very dramatic”.

A fifth of people are turning to online influencers for information, not simply recipe inspiration, on healthy eating - despite queries over qualifications...

The festive season is incoming, and if it’s anything like previous years we’ll be spoilt for choice with beauty advent calendars. Counting down to Christmas is infinitely more exciting with a luxury beauty gift to open every day and if you’re looking to treat yourself (or someone special), one of our absolute favourites is always the offering from Net-a-Porter. RELATED: The best beauty advent calendars to shop now MORE: The White Company’s advent calendar for 2022 is so luxe – and it’s available

Kelly Ripa is a proud mom to three children – but she recently thought a fourth was on the way after she convinced herself she was pregnant. SEE: Kelly Ripa looks gorgeous in flirty sheer dress for 'shameless plug' The LIVE with Kelly and Ryan star – who shares sons Michael, 25, and Joaquin, 19, plus daughter, Lola, 21, with husband Mark Consuelos – opened up about her lockdown pregnancy scare while discussing her upcoming debut book, Live Wire: Long-Winded Short Stories. WATCH: Kelly Ripa and M

The two queens of 1990s romcoms - Julia Roberts and Meg Ryan - are back in business. Roberts stars in this month’s Ticket to Paradise as a divorcee who has to travel to Bali with her ex, played by George Clooney. And Ryan has announced plans to direct and star alongside David Duchovny in What Happens Later, an “evolved and nostalgic” take on the romantic comedy which sees the pair reunited decades after their split when they find themselves snowed-in at an airport.

Catwalk star Kendall Jenner thinks there are "so many false narratives" about her famous family.

A mourner has been arrested after causing a "disturbance" as Queen Elizabeth lies in state and remains in custody, according to Westminster police.

Christie Brinkley took to social media on Monday to share a rare photo of her son Jack after they stepped out to watch the men's final at the US Open. MORE: Sailor Brinkley embraces change as she showcases brand new look Taking to Instagram, the 68-year-old posted a heartwarming photo of the mother-son duo posing at the USTA Billie Jean King National Tennis Center in Flushing, New York. WATCH: Christie Brinkley poses in flirty dress with daughters in wonderland garden Beaming from ear to ear, Ch

Emily Ratajkowski just wore one of the most iconic designs from the early aughts. In a series of photos posted on Instagram the supermodel donned a spaghetti strap v-neck mini dress from John Galliano's Fall/Winter 2000 collection, during his Christian Dior era. Emily paired the look with an oversized black jacket and zebra print knee high boots as well as a black 1990s style handbag. MORE: Emily Ratajkowski exudes supermodel radiance with latest soirée look RELATED: Has Emily Ratajkowski just f

Jennifer Lawrence and her husband Cooke Maroney had an early night after the premiere of her new movie, 'Causeway'.

As the nation mourns the death of Queen Elizabeth II, former royal chef Darren McGrady has opened up about her approachable and warm character traits in a recent interview with former Great Morning Britain host Piers Morgan. READ: Why royal ladies will wear hats to attend the Queen's funeral Darren joined Piers on TalkTV, giving viewers an insight into what the Queen was "really like" during the fifteen years he was her personal chef - and her down-to-earth quirks may surprise you. "She was amaz

San Juan police spokesperson Edward Ramírez told the Associated Press on Saturday that a person who wished to remain anonymous had filed a sexual assault complaint against the singer the day before. The outlet reports that though the complaint does not automatically trigger an arrest because the alleged incident was not recent... police will investigate and determine whether charges are warranted. Martin's attorney José Andréu-Fuentes shot down the claims in a statement to People.

'Arrow' star Stephen Amell is suing his neighbour over an alleged illegal animal adoption business.

The Great British Bake Off returned to our screens last night, and there's one contestant that has already captured the hearts of the nation

Dionne Warwick says Leonardo DiCaprio doesn’t know what he is missing with his supposed “25-year rule”.

During the ceremony staged at the Microsoft Theater in Los Angeles, the Juice hitmaker's reality series - Lizzo's Watch Out for the Big Grrrls - was named as Outstanding Competition Program, beating out the likes of The Amazing Race, Nailed It!, RuPaul's Drag Race, Top Chef, and The Voice. Taking to the stage in a red tulle gown, Lizzo urged the contestants from her series to join her from the audience "The trophy is nice but my emotion is for these people who are on this stage with me, the stories that they shared.”

Kevin Smith has revealed that Ben Affleck wrote a "breathtaking" speech for his wedding.

Robbie Williams has broken a chart record previously held by Elvis Presley as he scores his 14th number one album with new compilation 'XXV.'

Drew Barrymore has never shied away from her troubled past and has spoken often about her battle with addiction that started before she was a teenager. RELATED: Celebrities who have overcome addiction The mom-of-two previously revealed that she had her first taste of alcohol when she was just nine years old and began experimenting with drugs when she was ten before turning to harder substances aged 12. WATCH: Emotional Drew Barrymore revisits mental health facility where she was a teen patient D

Prince William is grieving the loss of his beloved grandmother, ahead of her funeral on Monday. MORE: Princess Anne's heartbreaking secret tribute to the Queen And as such he has put all other commitments on hold as he continues to mourn alongside his family. WATCH: Prince William reveals how he is coping with his grief Among his many upcoming engagements was the inaugural Earthshot Prize Innovation Summit on 21 September. READ: Royal photographer reveals real reason Prince William invited Megha